Success Stories

Hermeticity

Challenge: Vacuum pressure gauge requires leak rates less than 1 X 10¯10 std cc/sec Helium at 14.7 psi
Solution: Tekna Seal's proprietary oxide free sealing process for glass seals allows us to exceed this requirement without the expense of a ceramic-to-metal feedthrough.
back to top

Pressure

Challenge: Application required hermetic seal to retain pressure in excess of 25,000 psi
Solution: Tekna Seal helped the customer identify the failure mode in their existing design which allowed the customer to redesign their product to withstand test pressures significantly greater than the specification required.
back to top

Material Choices

Challenge: Customer requires hermetic seals in titanium housing. Housing must be free and clear of additional oxide or nitride to be suitable for welding.
Solution: Tekna Seal's proprietary oxide-free hermetic sealing process in combination with silica-free glass creates a hermetic seal to titanium surface without additional oxide or nitride required.

Challenge: Customer design requires higher current carrying capacity than standard glass seal pins allow without overheating.
Solution: Seals were made with Copper pins using newly available glass with a higher coefficient of thermal expansion than traditionally available glass materials.

Challenge: Pins must provide corrosion resistance without plating.
Solution: Hermetic seals were made with stainless steel pins using newly available glass with a higher coefficient of thermal expansion than traditionally available glass materials.

Challenge: Photonics manufacturer wishes to package a long attenuator crystal that has a coefficient of thermal expansion incompatible with the standard Kovar package material.
Solution: Glass-to-metal sealed packages using Metal-Injection-Molded housings with alloys custom tailored to the expansion rate of the crystal.
back to top

High Temperature

Challenge: Application requires seals to withstand temperatures in excess of 500°C.
Solution: Seals were made using crystallizing ceramic glass. Crystals reinforce the glass allowing for reliability of the seal up to 600°C.
back to top

Features, Fabrications

Features cast into glass
Challenge: Interconnection requires keyed orientation integrated into the glass seal
Solution: A ceramic doped glass with a much higher working point temperature than the sealing glass allows for the key feature to be economically molded into shape.

Metal Injection Molded
Challenge: Package geometry requires complex machined features in Kovar
Solution: The housing was manufactured as a molded package, eliminating the need for machining. This significantly reduced the cost of the package.
www.flomet.com

Stamping
Challenge: Customer's design required thick and thin sections incoporated into the stamped housing.
Solution: Tekna Seal manufactured the feedthru from two inexpensive stampings simultaneously brazed and glass sealed into a single robust assembly.

Brazed components
Challenge: Customer requires a low thermal expansion die mount surface in a corrosion resistant stainless steel housing.
Solution: Tekna Seal's oxide free process allows us to simultaneously braze and glass seal, providing a low cost solution for combining dissimilar material properties.

Integrated ESD protection
Challenge: Manufacturer of pyrotechnic devices required suppression of ESD threats during assembly of their initiators.
Solution: Tekna Seal incorporated a gas arrestor integral to the hermetic seal providing protection in all stages of manufacture of the initiator. See US Patent no. 5768083 and 5726854.
back to top